‎MSNJ

PEEK K10LCF is a carbon fibre reinforced peek material with extremely high strength, rigidity and high temperature resistance
Printed parts can replace metal parts on many occasions to achieve light weight and high strength
And the material is printed without distortion, and the printed parts have excellent one-layer adhesion and surface quality

High print quality: PC material has the characteristics of high temperature resistance, UV resistance, high transparency, good light transmission, good shine, stiffness and toughness
Dimensional accuracy and consistency: advanced CCD diameter measuring and self-adjustment system in manufacturing ensure strict tolerances. Diameter 1.75 mm, dimensional accuracy +/- 0.03 mm without exaggeration, 1 kg spool
Flame retardant PC filament: PC filament has strong flame retardance, UL94 V-0 flame delay, suitable for printing high strength and high temperature resistant parts

The production process controls the dispersion and distribution of the reinforcing fibres in the material matrix so that the reinforcement fibres form a network skeleton structure in the material and are based on the majority of the load transmitted by the material matrix. Improves the mechanical properties of the material
UltraPA-CF is specially designed for the FDM3D printing process. The base material is high temperature nylon, which has the properties of low moisture absorption, high strength, high wear resistance, excellent chemical resistance and high heat resistance.
During the printing process, the dimensional stability is good, there is no distortion and no shrinkage, and it can be used with carrying materials to solve the problem of bad shape effect on the support surface of complex models.

Shiny silk PLA: Smooth and shiny finish like real silk, no additional polishing required, prints with high detail in a beautiful finish. High quality silk PLA filament brings crafts and 3D projects gentle shiny silk-like surface that definitely gives an eye popping result!
Dimensional accuracy and consistency: these hard silk PLA filaments are strict tolerances. Diameter 1.75 mm; 1 kg spool
Clogge-free, bubble-free and user-friendly: fill the dry for 24 hours before sealing the packaging and vacuum with desiccant in the nylon back bag. Recommended PLA filament extrusion / nozzle temperature 195-230°C, bed 60-70°C.