Thank you for using a special companion for 3D printing filaments.
The drying box can help you avoid various printing problems caused by 3D printing materials exposed to the air for a long time to absorb water. For example, there are air bubbles, excess wire drawing, rough surface of the model, reduced adhesion between layers, and printer plugging.
The built-in high-precision digital thermometer and hygrometer and physical desiccant keep the humidity in the box below 15% for a long time, which can effectively prevent the 3D printing wire from absorbing water and damp during printing and storage. It is especially suitable for 3D printing materials that are difficult to store for a long time due to high water absorption, such as Nyon, PVA, PVB, and PEEK.
It is highly compatible, and can be placed on wire reels with a net weight of 1 kg or less, and compatible with 1.75 mm, 2.85 mm and 3.0 mm wires.
– Drying bin: There are 6 independent drying bins, equipped with independent and easy to remove cover.
– 3D printing spool: the outer diameter is 200 mm, the thickness is 70 mm and below the spool
– Desiccant type: bentonite particles.
– Desiccant specification: 15 g x 6.
– Humidity measurement range: 10~99%.
– Humidity measurement accuracy: +5%.
– Humidity display resolution: 1%.
– Humidity refresh cycle: 10 seconds.
– Temperature measurement range: -50 ~ 70 °C.
– Temperature measurement accuracy: +1C.
– Battery specification: LR44 x 1.
– Outlet support: Teflon tube with an outer diameter of 4 mm or 6 mm (use alone or at the same time).
– Product size: 220 mm x 220 mm x 81 mm.
Note: Does not include filament
Make sure this fits by entering your model number.
【Keep dry】Dust-free, moisture-free. The filament dryer box is a great addition to the 3D printer, it can dry the filament during 3D printing, no more brittle PLA, PETG, ABS filament.
Simple but effective: the print quality is better when the filament dehydrator box is used, which is dried by the filament dehydrator box, increases surface smoother, layer removal. It can be helpful if you live in a damp temperature zone.
High compatibility: the maximum capacity of the drying box is 200 x 70 mm. It is perfectly matched with PLA, ABS, PETG, TPU, silk, nylon, PA-CF, PVA and other 3D printer filaments with diameters of 1.75 mm / 2.85 mm / 3.00 mm.
【Filament Dryer Box】Specially designed to dry 3D printer filament and remove moisture from different filaments. Provide a dry storage environment for the 3D printer filament. Great companion for all FDM 3D printers.
Good after-sales service: after-sales service and technical support are provided. If you have any questions about the filament dehydrator field, please do not hesitate to contact us.