What is PA-CF:
Carbon fiber nylon is made by adding carbon fiber to the nylon base material. The material is added with high-rigidity carbon fiber based on the properties of nylon, so that the material has a higher modulus and rigidity.
Instructions for use:
1. Due to the particularity of nylon carbon fiber consumables, please confirm whether the printer can print nylon carbon fiber;
2. Applicable models: with heat: bed, closed cavity;
3. The built-in Teflon tube of the throat is recommended for 0.6mm nozzles. The bottom plate is recommended to be pei orifice
He made a special platform to prevent warping;
4. Affected by product characteristics, nylon is very easy to absorb water and moisture. Please use it as soon as possible when opening. Please dry and seal the bag when not in use. After moisture absorption, the material needs to be dried at 90~100°C/6h
5. Before printing, check whether the machine is normal, whether the distance between the hot bed and the nozzle is appropriate, and clean up the residual material on the nozzle
6. The printing temperature varies from equipment to equipment, the best feeding temperature can be detected by pre-extrusion, and the material is discharged smoothly. The printing temperature should not be too high, otherwise there will be the possibility of drawing;
7. The printing parameters are related to the performance of the machine, the size of the model, the degree of complexity, the characteristics of the material, etc., to find the process parameters that match the machine and material to improve the printing effect of the product;
Print data:
Printing temperature: 240~260°C
Base plate temperature: 80°C
Density: 1.24g/cm³
Melt index 10 (250°C/5kg) g/10min
Tensile strength 75Mpa
Elongation at break 26%
Flexural strength 122Mpa
Flexural modulus 5160Mpa
lzod notched impact strength 12KJ/m²
Heat distortion temperature 120 (°C, 0.45MPa)
75% Nylon mit 25% Kohlefaser gekoppelt. Hohe Festigkeit und Steifigkeit. Hohe Zähigkeit. Verschleißfestigkeit. Hohe Präzision. Geringe Schrumpfung. Wärmewiderstand 120 ° C. Flammschutz UL94-V2. Kompatibel mit den meisten 3D-Druckern.
Mindesttoleranz und niedriges Verzug, um konsistente Fütterungs- und stabile Drucke, kein Verstopfen, extrem hohe erfolgreiche Rate zu gewährleisten, was zu bedruckten Teilen führt, die über eine hervorragende Oberfläche verfügen und sehr präzise sind.
Full 1kg 3D-Druckerfilamentrolle, perfekte Rundheit und sehr enge Durchmessertoleranz, überlappt sich nicht oder verwickeln sich nicht. Schmelzen Sie gut, kein Riss, keine Blasen. Füttern Sie reibungslos und ständig, ohne die Düse oder den Extruder zu verstopfen.
Es verfügt über eine höhere Festigkeit und Steifigkeit, weniger Verzug und widerstandsfähiger, um den Vergleich mit dem traditionellen Nylonfilament zu tragen. Geeignet für starke und flexible Industrieteile, Prothetik, medizinische Geräte und komplexe Kostüme usw.
Nettogewicht: 1kg. Esun-Filament wird in einem versiegelten Vakuumbeutel mit Trockenmittelbeutel geliefert, um es trocken zu halten und Staub- und Fremdpartikel auszuziehen, Düsenstau zu verhindern und glatte 3D-Modelle zu ergeben.
There are no reviews yet.