eSUN Licht Gewicht PLA Filament 1.75mm, 3D Drucker Filament PLA-LW, Dimensionsgenauigkeit +/- 0.05mm, 1kg Spule (2.2 lbs…

Make sure this fits by entering your model number.
Lightweight PLA: PLA-LW starts to foam at a pressure temperature of 210-270°C. With a maximum foam rate of 122% (270°C), its volume increases by almost 1.2 times. The minimum extrusion rate can reach 45% to print projects with light weight and low density through active foam technology.
Foaming material: When printing the same volume model, 1 roll of PLA-LW filament corresponds to 2.2 rolls of ordinary PLA filament, the foam volume ratio can reach 220%, saving 55% material. Foaming rate and strength can be controlled by adjusting the pressure temperature.
Professional for model airplanes: specially developed for model aircraft enthusiasts. Lightweight Low density 0.54 g/cm³. Easier surface load. Lower hutch speed Better model aircraft performance. Widely used in model airplanes, drones, cosplay and other areas.
Matte and delicate surface: excellent surface effect, basically no layer structure; good layer composite, easy to repair; easy to paint, strong adhesion of surface pigments. Minimal tolerance and low distortion to ensure even feed and stable prints without clogging the nozzle or extruder.
Please note: the foam rate depends on the printing temperature, the printing speed and the size of the nozzle melting cavity. Please compare the wall thickness of the model and design according to your printing situation and adjust the setting of extrusion rate, temperature, speed and other print parameters.