PLA Metallic is a highly aesthetic filament based on PLA with metallic sparkling flakes. The slightly modified filament retains the typical characteristics of PLA, but harder and less brittle. Polylactic acid is one of the most popular materials for 3D printing. Due to the translucent of PLA in combination with the flakes, colour saturation can be increased by increasing the wall thickness. Food contact recommended. | Pressure temperature 205-225°C | Heated bed from 35-60⁰ | Pressure recommendation/guideline: print at 210 to 225°C with a bed of 60°C (heated bed is not required, but it is good to have it at 60°C) at 50mm . It does not require a closed environment but active cooling (50%+). The retraction is very good at 4.5 mm and 45 mm. The adhesion of the bed is excellent with PVA or hair spray. It is recommended to rinse the nozzle after printing to prevent the formation of flakes for the next pressure.
Beautiful glitter effect that helps hide the print layers
Stronger and less fragile than normal PLA
Easy to print at low temperatures (205 – 225 °C)