,

OVERTURE PETG Filament 1,75 mm , 1 kg (2,2 lbs) Spule, Maßgenauigkeit +/- 0,05 mm (Transparent)


Make sure this fits by entering your model number.
PETG spool 1 kg x 1 and building surface x 1: each PETG filament with a piece of 200 × 200 mm construction surface to support overture filaments. Grid layout on the surface for easy adjustment of the model size.
Block-free and bubble-free: designed and manufactured with block free patent to ensure a smooth and stable printing experience. Full drying for 24 hours before vacuum packing in aluminium foil, which can effectively keep the PETG filament dry.

Amazon.de Preis: 22.99 (am 06/04/2023 10:20 PST- Details)

PETG filaments are made from high quality PETG plastic which combines the advantages of other filaments such as safe and odourless, low shrinkage rate, high impact resistance and good liquidity (flowing). In addition, these beautiful PETG filaments make prints appear with a little ‘shine’ or ‘sparkle’.


FAQs:

Why can’t the filaments stick to the construction bed?

Check the temperature setting before printing, PETG filaments have a higher extrusion temperature than that of PLA.

Check if the plate surface has been used for a long time. It is recommended to replace them with our to ensure strong adhesion of the first layer.

If the first layer has poor adhesion, it is recommended to re-level the pressure substrate to reduce the distance between nozzle and surface plate.

If the effect is not good, it is recommended to try the design before printing.


Specifications:

Temperature:

Recommended extrusion/nozzle temperature: 230 – 250 °C.

Heater bed temperature: 80 – 90 °C.

Filament diameter and accuracy: 1.75 mm + / – 0.05.

Filaments net weight: 1 kg.


Recommended printing conditions:

Cooling fan: switched on.

Printing speed: 30 – 50 mm/s.

Raft separation: 0.14 mm.

Return distance: 1 – 3 mm.

Note: Based on 0.4 mm nozzle and simplified 3D V 4.0, printing conditions may vary depending on nozzle diameter.


Make sure this fits by entering your model number.
PETG spool 1 kg x 1 and building surface x 1: each PETG filament with a piece of 200 × 200 mm construction surface to support overture filaments. Grid layout on the surface for easy adjustment of the model size.
Block-free and bubble-free: designed and manufactured with block free patent to ensure a smooth and stable printing experience. Full drying for 24 hours before vacuum packing in aluminium foil, which can effectively keep the PETG filament dry.
Less tangled cables and easy to use: full mechanical winding and strict manual detection that ensures that PETG filaments are more uniform and easier to take; the design with a wider inner diameter of the coil makes the supply smoother.
Dimensional consistency and accuracy: the advanced system with CCD diameter measurement and self-adjusting control system through manufacturing ensures that these mat filaments have a diameter of 1.75 mm, a dimensional accuracy of + / – 0.03 mm (95%), net filament of 1 kg.
Compatibility and economy: with over 8 years of R & D experience with 3D filaments that produce thousands of tons of filaments every month, Overture is able to produce all kinds of large-format filaments of the highest quality that are suitable for the most common 3D printers.

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “OVERTURE PETG Filament 1,75 mm , 1 kg (2,2 lbs) Spule, Maßgenauigkeit +/- 0,05 mm (Transparent)”

There are no reviews yet.