PETG Filament 1.75mm Pack 2KG, TINMORRY Filament 1.75 PETG, Filament-3D-Druckmaterialien, Black+Red+Olive Green+Telecom…


Extruder temperature: 220-250 °C, no special hot-end required, part cooling fan required.
Heated bed recommended temperature: 75-90 °C, enclosure not required.
Filament diameter and accuracy: 1.75 mm +/- 0.03 mm; filament net weight: 2 kg.

Amazon.de Preis: 46.52 (am 09/04/2023 10:32 PST- Details)

Welcome to TINMORRY 3D Printer Filament Factory.

PLA filament, 1.75 mm, technical specification:

Diameter: 1.75 mm, tolerance: +/-0.03 mm.

Printing temperature: 220 – 250 °C, hot bed temperature: 75 ℃.

Recommended printing speed: 30-70 mm/s, net weight: 2 kg, length: approx. 660 m.
Note:
Please make sure that the filament is not exposed to direct sunlight or fire after opening the package and keep in a dry and well ventilated place.

Ensure that you remove the filament from the extruder to avoid clogging if you do not use the printer for a long time.

To avoid filament tangles, we recommend inserting the end of the filament into the holes of the spool.

Extruder temperature: 220-250 °C, no special hot-end required, part cooling fan required.
Heated bed recommended temperature: 75-90 °C, enclosure not required.
Filament diameter and accuracy: 1.75 mm +/- 0.03 mm; filament net weight: 2 kg.
Fully mechanical winding of the filament and strict quality control, which guarantees our PETG (polyethylene terephthalate glycol) filament is tidy and can be fed in easily.
A PETG filament incorporates the advantages of other filaments: safe and environmentally friendly; adheres well to the bed with negligible warping; mostly odourless while printing; high impact strength and good liquidity

Kategorie:

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “PETG Filament 1.75mm Pack 2KG, TINMORRY Filament 1.75 PETG, Filament-3D-Druckmaterialien, Black+Red+Olive Green+Telecom…”

There are no reviews yet.