LAYBRICK das sandsteinartige Filament LAYBRICK  ist ein grobes, sandsteinähnliches Filament für groÃe Architektur-Modelle. Die einzigartige Verbindung aus mineralischen Anteilen mit Co-Polyester, sorgt so für sandsteinartige Objekte, die sich vor allem für Architekturmodelle eignen sollen. Die mit dem Laybrick gedruckten objekte können anschlieÃend bemalt und geschliffen werden.  Die Eigenschaften von LAYBRICK Filament: near zero warp !!! the filament is printable from smooth to very rough surface, near sandstone no plastic feeling, ideal for jumbo-printers/ read below about beta!!! the objects are ink-able, grind-able no heated bed necessary contains natural mineralic fillers (super-fine milled chalk) and harmless co-polyesters print temp: 165°C to get smooth, higher temperatures (210°) will print rougher surfaces, fan needs to be on use M227 code: f.e. S 30000 P 10000 you may print layer-thickness from 0.1 mm to 0.5 mm slicing: object fill max. 25% , fan needs to be on  !!! wait after printing  until object is hardened, then remove it from platform (2-4 hours) the printed object is temperature stabil to about 70° Celsius print in rooms with more than 20°C, the filament ist more bendable then!!! Experimentelles Filament  Lieferumfang:  1x loser Ringbund von LAYBRICK, 250g,       Â
Keine Erfahrungsberichte vorhanden